Advantages:

• Complies with the EN 61000-4-30 Class A standard
• 3 U / 4 I measurement inputs
• Analysis of the parameters according to EN 50160
  
• Large storage capacity (128 MB)
• Compact and easy to install in a cabinet

Description:

The MAP 620 analyzer measures and records the following parameters of HV / MV / LV electrical networks:

• RMS voltage
• Direct, negative-phase-sequence and homopolar voltage
• Level of unbalance
• Current
• Power measurements (P, Q, S /PF, cos phi)
• Energy measurements (Ea, Er, Es)
• Frequency
• THD
• Harmonics up to the 50th order
• Interharmonics
• Lfl, Pst and Plt flicker

Main functions:

• Voltage parameters: Min., Max. and average values
• Current parameters: Min., Max. and average values
• Voltage measurements (dips, outages, interruptions and overvoltages)
  1/2-1 cycle RMS
• Waveform recording: up to 12.8 kHz, configurable
• Possibility of configurable pre/post-triggering
• Transients: 78.125 µsec.
• Configurable analysis templates (other than EN 50160)
• Clock synchronization: GPS / DCF (via external coupler)
• Measurement of signalling voltages < 3,000 Hz
• PQDIF data format: available as an option
• Memory backup (Flash): 128 MB
• Internal power reserve: 10 sec.

• Voltage input: 3 channels: 0-275/400 VRMS (400/690 V available as an option)
• Current input: 4 channels, 0-6 A RMS
• Analogue inputs: 4 (0-20 mA)
• Voltage accuracy: < 0.1 %
• Possible power supplies: 85-264 Vac, 690 Vac (47-63 Hz) / 48 Vdc, 110-375 Vdc
• Communication: RS232 / Current loop / Ethernet port (depending on model)
• Dimensions (L x H x W) in mm: 160 x 240 x 40