Three-Phase network analyzer-Voltage and current MAP610

map610_g

Advantages

  • Complies with theEN 61000-4-30 Class A standard
  • Analysis of the parameters according to EN 50160
  • Large storage capacity (128 MB)
  • Compact and easy to install in a cabinet

Description

The MAP 610 analyzer measures and records the following parameters of HV / MV / LV electrical networks:

  • RMS voltage
  • Direct, negative-phase-sequence and homopolar voltage
  • Level of unbalance
  • Frequency
  • THD
  • Harmonics up to the 50th order
  • Interharmonics
  • Lfl, Pst and Plt flicker

Main functions:

  • Voltage parameters: Min., Max., average values
  • Voltage measurements (dips, outages, interruptions and overvoltages)
    1/2-1 cycle RMS
  • Waveform recording: up to 12.8 kHz, configurable
  • Possibility of configurable pre/post-triggering (MAP 610-300 series)
  • Transients: 78.125 µsec. (MAP 610-300 series)
  • Measurement of signalling voltages < 3,000 Hz
  • PQDIF data format: available as an option
  • Memory backup (Flash): 128 MB
  • Internal power reserve: 10 sec.

 Specifications

  • Voltage input: 3 channels: 0-275/400 VRMS (400/690 V available as an option)
  • Possible power supplies: 85-264 Vac, 690 Vac (47-63 Hz) / 48 Vdc, 110-375 Vdc
  • Voltage accuracy: < 0.1 %
  • Communication: RS232 / Current loop / Ethernet port (option)
  • Dimensions (L x H x W) in mm: 160 x 240 x 40